Gradually getting there

Hello campers!

This week has been quite good regarding the development of the casework of the organ. As you'll already know from previous posts this month, I've started butchering the grade A quality oak I've got for the cabinet. The key cheeks for all four manuals are done(ish). They were all beautifully measured and amazingly it was correct even when I did it. The scrolling I did as a little decorative end was NOT easy. That took ages as it was my first time of using a scroll saw and putting oak that is quite thick through it with the wrong blade on (ahem) made for an interesting couple of evenings. I got there all I've got to do now is the glueing and screwing into place and then lots and lots of sanding to make it look lovely - which it will.

The next part of the project is to start on the cabinet. To be honest, I'm anticipating it being the easier part of the project. I've got most of the wood cut more or less to length so that's a start at least!

I've been doing a lot of research this week on using a router successfully. I borrowed my mother's as well as her router table (yes, my mother's, she's a funny girl!) and spent the other evening just getting a feel for them and just working out - without even turning it on - how it feels and how to attach the fence, bits and how to adjust the depth and things like that. I'm now the leading expert in the world when it comes to a router that's not been plugged in.

Youtube's fantastic for learning new skills. I've watched at least 3 hours' worth of tutorials on there which has been great - Very interesting indeed to be honest. It saves pratting about in the library for hours on end and then finding that the only reference book you can find was published in 1954 which would make it only slightly out of date in 1955.

Today's plans are to go out into the garage and have a few tentative attempts at using the router and if I'm really brave I might even knock up a side panel... if I'm REALLY brave AND LUCKY I might do two if they work out well. Well, there's nowt wrong whatsoever in optimism is there?

Wish me luck!

Totally irrelevant but nice

Yesterday I spent several hours in the garage fiddling with the new scroll saw. I've now got about three blood blisters and a crushed finger that is oozing a yellowy white pus... so it was the same as it usually is when I've been doing my DIY!

I made a half-decent stab at doing the key cheek designs which I was relatively pleased with. I'm not going to post pictures of them as yet as I'm wanting to make them MUCH prettier than they are at present. The phrase 'ugly duckling' certainly springs to mind. I'll spend some time tomorrow tarting them up and if you're good; only if you're good, I'll post some pictures of the work so far. I'm happy with the results thus far. Not extatic yet, but the potential is definitely there.

Now to the totally irrelevant bit...

Martin and I decided a few weeks ago that we'd at long last have a civil partnership. As we've been together now for just short of 13 years we felt we'd served our time. So, we set a date of November 10th which is just a couple of days before the date we always celebrate as our 'anniversary' which is 13th. We're off down to London on the 9th, staying at 'The Capital' in Knightsbridge and dining at Le Gavroche that evening. The following morning, Kerry and Don, our witnesses are coming over from their hotel to have breakfast with us at our hotel and then we're all going off to the Old Town Hall at Marylebone where we're having the ceremony. To say it'll be small is an understatement as there'll only be 6 there... Martin, me, Kerry, Don, the Chief Registrar and the Registrar. That's more than enough! After the ceremony we four are going to The Wolseley for lunch. Martin and I are then going to see La Sonnambula at Covent Garden and will be doing a couple of other things that interest us like museums, 'pubs, photographs, sightseeing and the like. The following evening we're going to have dinner at our hotel and then on the Saturday we're back home. We're both really, really looking forward to it.

Today we went across to Newcastle to get new suits. Now I've got at least half a dozen suits that fit me or don't fit me depending on whether the waist is 32, 34, 36 or 38". Yes, really! Currently I'm at 32" and heading downwards. I've got a really, really nice suit I bought for my dad's funeral (he is dead - I'm not just hoping and jumped the gun a bit regarding the wardrobe choices) but sadly I've lost 2 stones in weight then (only sad 'cos the suit doesn't fit anymore!). So, new suits it was. I opted of a light grey three piece suit with a red/orangy coloured tie and a new plain 'posh' shirt with the double cuffs because I like to wear cufflinks. I did plan on getting new shoes too but nothing grabbed my attention so I didn't bother. Martin being Martin was very keen to spend 18p on teh entire ensemble. He ended up spending a lot more than me and I'd pretty much decided that whatever it cost I'd pay it. So, we're both suited and one of us is booted. Innit, sweet?

Hive of activity

It has been several months now since I wrote in my blog. For that I'm sorry. Why I'm sorry I've no idea as I'm pretty certain that I'm the only person out of 6,500,000,000 people on the planet who actually reads this. Ah, already I've digressed!

Anyway, I'm off work poorly bad (AWWWW). I've got Impetigo which is pretty minging but as I work in education and it is very infectious (the impetigo - not the education) I've been told to stay at home. It's the best illness in the world. You feel spotty and scabby and have to watch that you don't pick bits off yourself but you feel fine and are able to tackle some of the jobs you've been meaning to do for ages so that's a result then!

On the right, you can see the results of what I've been up to thus far this week. Yes, there's some extremely oversized key cheeks there, you're right. How high they look. Don't worry, I've not got an elastic tape-measure. I was playing.

The hawk-eyed readers amongst you will spot what looks like a different MIDI keyboard from the ones I've been using until now. It's absolutely right. I decided the other day that I wanted them all to match, to have no cracks in them and for them to actually have tidy wiring (Ahem) so I bit the bullet and bought four keyboards from Thomann, a German company that I can't recommend enough. They're the best company in the world. Fantastic quality, service, prices, the lot. I got four brand new midi keyboards, including delivery from Germany to the UK (3 days) for £236.00. Bargain or what? Anyway, I ripped them all to pieces so I could just have the keyboard and the midi bits rather than the bells and whistles and the little oompa rhythm section. Now, what you see above is the result of one of the recently gutted keyboards with a very rough-and-ready mock up of what the keyboard setup will look like. Impressive, I agree.

I looked all over to ensure the depth of the manuals would be right. Too deep and it would be too high (as in the picture) and too shallow and there'd not be enough space to get the keyboards in correctly thus forcing me to move each keyboard further back to accommodate. I'd end up stretching further than I need to if I did that. I measured my own (keyboards... dirty buggers), measured one or two other instruments I know and came to the conclusion that the correct height for a 'cheek' is 2.5" or 5cm whichever you prefer. With that in mind, I marked up the oak lengths I'd bought. Once that was done I decided that I wanted to have the cheeks thicker than they currently looked. They were only 1" thick which made them look a bit cheap so I doubled up each edge which made them look MUCH meatier. I'm glad I did that. As you can see to the left the cheeks do look much more butch now they're twice as thick.

You'll have seen lots of pencil marks and a pretty little drawing on the side of the cheek too. Well' I didn't just want a plain edge like most organs have, I like a bit of show. I looked around on the internet to find a design I liked. That took a LONG time as strangely, people don't seem to put close-up shots of the corners of their pipe organ keyboards on the 'web for the world to peruse. Eventually, I found a design that I like. If you look closely above the top bow outwards, there's a tiny step. That is to echo the top of the key so that the key can sit just a couple of millimetres below it and run parallel. How posh, eh?

The design looks a bit fiddly and to be honest it's dead easy. You've just got to be brave enough to trust your eye for detail. I actually got a bit of cardboard, a £2 coin and a £1 coin. I put them both on the card and drew round the £2 above the £1 coin and just followed the line around and ended up with that shape. Here, here's a picture that I hope will help. Also the template is 2.5" high... remember? Thought you did.

So, now I've got my cheeks and, as you can see from the money shot (ho, ho, oo, er) above, there's a step cut out of the bottom. There is but that's only on the inside one. The outside one goes along the entire bottom too (the save level as the foot at the front of the template). The reason is so that the keyboard can slide in on the little MDF base I've made but not told you about so that you'll not see it at all from the front. Clever, eh?

As I don't trust my freehand precision cutting with a jigsaw that's slightly less accurate than a blind man wielding an axe hoping to take the top off his boiled quail's egg, I decided that I'd best get a coping saw. After thinking further on the idea I opted for a scroll saw. I ordered one off eBay which cost me about £75 inc. P&P which I was very pleased with. I'll use it a lot as I'm planning on doing several fretwork projects in the future. Yes, indeed my grandmother is going be be receiving the world's worst attempt at a bit of fretwork on a manky panel that you hang on the wall for her Christmas present and she's going to like it too... or else!

Tomorrow's plan, therefore, is, presuming the saw arrives, to cut out the inside (stepped) cheeks, screw them to the outside cheeks and then cut the detailing for the ends on the scroll saw. Ideally, I'll be able to at least knock up the four keycheeks with maybe one keyboard attached. If I can I'll put up a piccy or two of the setup. I'm determined to get that part finished by the end of next week so I can transplant the new keyboard setup into the bedroom and demote the four keyboards I have been using to the garage in anticipation of a quick journey to eBayland... or maybe two of them can go to work in my office to practice with. We'll see. The former I'd guess. My boss has already told me that he doesn't like my harpsichord that I took in. Damnitt!

It all happens together

The last time I checked in I was talking about the computer being ordered. It arrived! Hurrah! Very stylish piece of kit... until... It kept switching itself off and rebooting time and time again. I wasn't fussy on sending it back as we'd go through the 'did you do this? Did you try that? Can you wrap it up and put it by for our delivery man to turn up somewhere between now and 2014? You know the gist. Anyway, I thought that it couldn't be too much of a problem so I did lots of research and came up with a faulty ram stick. I contacted the guy who supplied it, he agreed wholeheartedly. I took each one out in turn and all of a sudden it was working 'champion' once one stick in particular had been removed. I've just got to pop it into the post and he'll send me a replacement. Dead easy. Then... Martin went out for a day mooching about in Carlisle with his mate, Steve. When Mart came back, he mentioned something about a sound system that Steve was wanting to put onto Ebay. Of course, I've been sort of looking for something now I know what outputs the computer has. I gave him a ring and to my HUGE joy, it was exactly the system I'd been coveting but not wanting to pay full price for or buy off the internet. He did me a really good deal. Steve being Steve, I knew that they'd be in the same condition as he got them so I had no worries whatsoever about condition. Brill, I've got the Bose Acoustimass 5 series iii. Wonderful. Now, I'll have to get an amp to run it through. Researched again. They're expensive. Hmm, not this month. You know what I'm like. I thought 'well, you could be dead next month' so out to Peter Tyson's (a local electrical/audio/visual company). I got what I wanted with best part of £100 knocked off. Still cost me £200 mind so don't think it was bargain of the century. This evening I've been faffing around AGAIN. Wiring up here, wiring up there, moving this here to there and back again trying to get it all to fit. It looks pretty hysterical at present as there's a lot going on but it sounds absolutely fantastic. My next project is getting a video up on this blog of me playing. If you're really lucky I'll even take my gloves off!

Another big day

Yes, I know, ages since I was last in but in fairness, it has been a bit of a busy time. So, the other day I decided that there must be a way where I can have the organ set up in the bedroom AND have room for the bed settee to be open at the same time. I've got sick of hauling it in and out of the house (as Martin said I would). A lot of jiggling, juggling, mingling and cajoling got it sorted out and now, I've got to say, that it's great. Lots of floor space and it's nowhere near as dominant as it once was. I've found myself a bit of spare money (at last) and today I ordered a computer that'll be exclusively for the organ. It's perfect as it's simply memory and processor. Not a great deal more to it than that really. I'm not going to bore you with the spec' but the gist of it is... 16GB memory 2TB hard drive Lots of high end stuff that come for a low end price. I've been looking at this for ages so am very happy with the purchase. I just can't wait for it to get delivered now! I'm very pleased that it has lots of audio output capabilities as the next thing for me to try to get sorted is the sound system... And on it goes again!

Nearer and nearer

It's the beginning of the New Year. All of the celebrations are over. The recycling bin is full of empties. I think the bin men will develop hernias just carrying our bottles let alone the chocolate wrappers. The decorations came down this morning as did the tree. The living room is looking particularly bare... and unusually clean!

Why am I talking about the beginning of the new year? Well, it means that the anticipated arrival of the Hauptwerk software is a little closer on the horizon. I'm very keen to see what you get and all that jazz. More's the point, I'm keen to receive the upgrade sometime soon. I'm very worried (well, no, not worried at all but interested) that there's no reverb. I like a bit of reverb. It sounds so unrealistic when you're playing it in the back bedroom without reverb. I know you can get 'dry' samples or 'wet' samples or whatever but I'll not be buying a new organ for the software for a little while as yet so it'll be good to have that to play with... Once the hand's a bit better at the end of Jan.

Not a lot to report, really. As you read!